AT & T HTC Desire 610 Simcode desbloqueo en tan sólo 10 minutos

HTC Desire 610 Overview :
The HTC Desire 610 is a mid-range Android smartphone with a 4.7-inch qHD display, 1.2GHz quad core processor, 1GB of RAM, 8GB of storage and a 8-megapixe BSI camera.

HTC Desire 610 Sim Unlocking :
Unlock AT&T HTC Desire 610 to use any where in the world with any supported service provider like

Optus Australia Brasil, Straight talk, FamilyMobile, Vodafone, Personal, Claro, O2, Digicel, Telcel, Orange, Telenor, Optus, Tele2, MTN Rogers, Fido, Chatr, Bell, Virgin, Sasktel, MTS, PC telecom, Tbaytel, Telus, Koodo

Only at

Click here to buy Unlock code

HTC Desire 610 Unlocking instructions:
1: Turn on phone with Not Accepted SIM card.
2: A menu will pop up to Insert the code.
3: Insert the provided code and press OK
4: Device is now unlocked.

How to Factory Reset/ Hard Reset HTC Desire 610:
How to Reset HTC Desire 610 pattern lock:

Hard Reset will erase all of your data
All described operations you are doing at your own risk.

First Method:

  1. In order to switch off your device press the Power key for a short while.

    Name:  01.jpg
Views: 50
Size:  121.5 KB

  2. Afterwards press and hold the Volume Down + Power button at the sime time for a couple of seconds.

    Name:  03.jpg
Views: 47
Size:  126.7 KB

  3. When you see the three Android images, then release held keys.

    Name:  02.jpg
Views: 139
Size:  146.2 KB

  4. In the next step press the Volume Down to select option “Factory reset“, and press Power button to confirm.
  5. Good job! The hard reset has just been performed.

Second Method:

  1. If the display is off, press the Power button to turn it back on.

    Name:  01.jpg
Views: 50
Size:  121.5 KB

  2. Then from Main Menu go to Settings and tap Backup & reset.
  3. Afterwards choose Reset phone and select Erase all data.
  4. Tap OK to confirm your choice.
  5. Success! Your phone is ready to use.

How to Update HTC Desire 610 to latest Firmware:

This software upgrade available for your HTC Desire provides the following key enhancements:
Bug fixes

Before you proceed, please confirm that this software upgrade to 1.53.502.11 ( 1.53.502.12 for pre-paid devices) is a newer version than what is currently loaded on your device. If it is the same version, there is no need to reload the software. Navigate to the Home screen then tap All apps > Settings > About > Software Information and locate the Software version. If your Software number is less than 1.53.502.11 ( 1.53.502.12 for pre-paid devices), you should proceed with the upgrade.

WARNING: During the upgrade process the device will reboot multiple times and show software upgrade screens. Do not remove the AC charger as this might stop the update and your device may be rendered inoperable!

Getting Started

  • Before you proceed with the update, make sure you have done the following:
  • Set aside approximately 20 minutes to allow the device to update
  • Connect the device to a charger
  • Ensure the battery is charged to at least 35%
  • Ensure the device is connected to AT&T 4G/LTE and a stable Wi-Fi network

Installation Instructions
To manually perform the update, follow these steps below:

1.From the Home screen tap All apps, then tap Settings.

2.Tap AT&T Software Update.

3.Tap Check for updates.

4.Tap Continue to download the update.

5.If downloading the update using the mobile data network (not connected to Wi-Fi), you may be prompted with a data fee warning message. If this is acceptable, tap YES to start the upgrade process.

6.Status of the download can be checked in the Notifications pull down.

7.Once the download is complete, the user will be prompted to install from the Notifications pull down. Tap the System update to begin the upgrade process.

8.Tap OK to begin the update process to software version 1.53.502.11 (1.53.502.12 for pre-paid devices).

WARNING: During the upgrade process the device will reboot multiple times and show software upgrade screens. Do not remove the AC charger as this might stop the update and your device may be rendered inoperable!

9.Device will reboot and begin installation. Users will not be able to use their device during the installation process (approximately 10 minutes).

10.The system update is complete. Tap OK to continue.

How to Root HTC Desire 610:

You will lose all your data and it is possible that you may brick your device
All described operations you are doing at your own risk.

  1. Download file (download it from here) and save the same on your computer – you can place the file on your desktop.
  2. Don’t unzip the downloaded file.
  3. Connect your smartphone with your computer via USB cord.
  4. Then, transfer the .zip file from desktop to your phone’s SD card.
  5. Finally, unplug the USB cord as the computer is no longer useful.
  6. Now, enter your Desire 610 into recovery mode.
  7. From recovery select “install zip from SD card” followed by “choose zip from SD card”.
  8. Pick the root package and flash the same.
  9. In the end, from main menu of recovery select “reboot system now”.
  10. Done.

Note: if after flashing the SuperSU file your device will get stuck in a boot loop, go back to recovery. From there this time select “wipe data factory reset” and “wipe cache partition”. Then, go to main menu of recovery and pick “reboot system now”.

Congratulations; you have successfully rooted your HTC Desire 610. That was all for now, but don’t forget that you can consider in updating your device with a custom ROM firmware and in performing other custom operations for optimizing the performances and for obtaining more power from your Android based smartphone.

Leave a Reply