AT & T Samsung Galaxy Mega 2 código de desbloqueo para usar con KPN Países Bajos, Rumania

Samsung Galaxy Mega 2 G750A Overview :
The new Mega comes to replace last year’s Galaxy Mega 6.3 and Mega 5.8 – so it’s a very big smartphone, sporting a 6-inch display with 720 x 1280 pixels, and measuring 163.6 x 84.9 x 8.6 mm, obviously being larger than the Samsung Galaxy Note 4. The Mega 2 has got a 2.1 MP front-facing camera, 8 MP rear camera with LED flash and 1080p video recording, LTE connectivity, 16 GB of expandable internal memory, 1.5 GB of RAM, and a quad-core 1.5 GHz processor. The device runs Android KitKat, seemingly offering most of Samsung’s latest software features – including Ultra Power Saving Mode (for longer battery life), and One-handed operation mode (quite useful on a screen that large).

Samsung Galaxy Mega 2 G750A Sim Unlocking :
Unlock AT&T Samsung Galaxy Mega 2 G750A to use any where in the world with any supported service provider like

Optus Australia Brasil, Straight talk, FamilyMobile, Vodafone, Personal, Claro, O2, Digicel, Telcel, Orange, Telenor, Optus, Tele2, MTN Rogers, Fido, Chatr, Bell, Virgin, Sasktel, MTS, PC telecom, Tbaytel, Telus, Koodo

Only at


http://www.WorldGSMCodes.com/

Click here to buy Unlock code

Samsung Galaxy Mega 2 G750A Unlocking instructions:
1: Turn on phone with Not Accepted SIM card.
2: A menu will pop up to Insert the code.
3: Insert the provided code and press OK
4: Device is now unlocked.

How to Factory reset/ Hard Reset Samsung Galaxy Mega 2 G750A:
How to Reset Samsung Galaxy Mega 2 G750A pattern lock:

WARNING !
Hard Reset will erase all of your data
All described operations you are doing at your own risk.

First Method:

  1. Power on the tablet.

  2. Next goto Menu -> Settings -> Backup & reset -> Reset device -> Erase everything.
  3. Then wait until your device will reset and reboots.
  4. Good job!


Second Method:

  1. Turn off your cell tablet.

  2. Now press and hold Volume Up + Home button + Power button.

  3. After few seconds you will see Recovery mode menu.
  4. From this menu choose option “wipe data / factory reset” using Volume buttons to scroll and Power button to confirm your choice.

  5. Next select option “Yes — delete all user data“.

  6. Then accept option “reboot system now“.

  7. Well done!

How to Update Samsung Galaxy Mega 2 G750A to latest Firmware:

  1. Connect your device to your computer using the USB cable. …
  2. Open Kies. …
  3. Click Firmware upgrade to start the upgrade process.
  4. A pop-up message may also display when you connect your device to Kies. …
  5. You will be taken through the backup process to preserve all of your data.

How to Root Samsung Galaxy Mega 2 G750A:

WARNING !
You will lose all your data and it is possible that you may brick your device
All described operations you are doing at your own risk.


Prerequisites to Root Samsung Galaxy Mega 2

  • Make sure that your device is Samsung Galaxy Mega 2 and running Android 4.4.4
  • Make sure that drivers are installed on your computer.
  • Make sure that your device is charged at least 69%
  • Enable USB Debugging on your device.
  • Backup important data on your device before rooting the device.
  • Download the rooting file from here.

Follow the below procedure to root your device. Don’t even skip a single step mentioned in the article.

Procedure Root Samsung Galaxy Mega 2

  • Download the Rooting file and extract it anywhere on your computer.
  • Now turn off your device.
  • Now you need to boot the device into download mode. To do this you can press Zoom Left and Power button same time for 5-10 seconds until you are in download mode.
  • Once you are in Download Mode you will see a yellow triangle ignore it and Zoom Right.
  • Now navigate to the extracted folder and run Odin as administrator.
  • Now connect your device to the computer and wait for a minute or two as it takes time for drivers to install.
  • You get a Successfully added message in the lower pane.
  • Next Click on the PDA button and select “CF-Auto-Root.tar” file from the extracted folder.
  • Press the start button and the flashing starts. Flashing takes not more than a minute or two.
  • After successful flashing you get a Pass message.
  • Restart the device and check Super SU is located in applications.

 

Leave a Reply