AT & T Samsung Galaxy Note 4 Red de Código Desbloqueo de usar con TIM Brasil, Everything Everywhere Limitado

Samsung Galaxy Note 4 N910W8 Overview :
The Samsung Galaxy Note 4 is the fourth instalment in the Note phablet series. It brings a much sharper, 5.7-inch 1440 x 2560-pixel (Quad HD) display, a powerful Exynos 5433 8-core system chip running at up to 1.9GHz, 3GB of RAM and a plentiful 32GB of internal storage in the basic model. The Note 4 is also the first in the Note series to get optical image stabilization for its main camera. In the Note 4, there is a 16-megapixel cam and a 3.7-megapixel front shooter for more detailed selfies.

Samsung Galaxy Note 4 N910W8 Sim Unlocking :
Unlock AT&T Samsung Galaxy Note 4 N910W8 to use any where in the world with any supported service provider like

Optus Australia Brasil, Straight talk, FamilyMobile, Vodafone, Personal, Claro, O2, Digicel, Telcel, Orange, Telenor, Optus, Tele2, MTN Rogers, Fido, Chatr, Bell, Virgin, Sasktel, MTS, PC telecom, Tbaytel, Telus, Koodo

Only at


http://www.WorldGSMCodes.com/

Click here to buy Unlock code

Samsung Galaxy Note 4 N910W8 Unlocking instructions:
1: Turn on phone with Not Accepted SIM card.
2: A menu will pop up to Insert the code.
3: Insert the provided code and press OK
4: Device is now unlocked.

How to Factory reset/ Hard Reset Samsung Galaxy Note 4 N910W8:
How to Reset Samsung Galaxy Note 4 N910W8 pattern lock:

WARNING !
Hard Reset will erase all of your data
All described operations you are doing at your own risk.

First Method:

  • Turn your phone off or make sure it’s turned off.
  • Press and hold the Volume Up, Home and Power buttons simultaneously.
  • When the phone vibrates, release the Home and Power buttons, but keep pressing Volume Up button.
  • This will launch the Android Recovery System. You can release all buttons when this happens.
  • From here, you can use the Volume buttons to navigate and the Power button to make a selection.
  • Select “wipe data / factory reset”.
  • Select “Yes — delete all user data”.
  • The process will take place. When done, just select “Reboot system now” to restart your device.

How to Update Samsung Galaxy Note 4 N910W8 to latest Firmware:

  1. Connect your device to your computer using the USB cable. …
  2. Open Kies. …
  3. Click Firmware upgrade to start the upgrade process.
  4. A pop-up message may also display when you connect your device to Kies. …
  5. You will be taken through the backup process to preserve all of your data.

How to Root Samsung Galaxy Note 4 N910W8:

WARNING !
You will lose all your data and it is possible that you may brick your device
All described operations you are doing at your own risk.

Pre Requisites:

Though root method mentioned below don’t erase internal memory data but we recommend to back up your data first before proceeding to avoid any accidental data lose.

1. It’s advisable to backup your data prior flashing. I recommend app Helium for this purpose, however you can use any other preferred backup app. [General Guide]
2. Make sure your device have enough battery power (at least 50% battery power) to avoid any accidental brick. You can install an app like Battery Notifier BT Free on your Android device to check it easily.
3. You must have USB Driver Installed for Galaxy Note 4 SM-N910W8 (Canada) in your PC. If you manage to access your phone data after connecting to your computer then you already have USB driver installed. [Download Driver Manually]
4. Make sure USB Debugging is enabled otherwise it’s won’t be possible to transfer file between PC and Galaxy Note 4 SM-N910W8 (Canada). [General Guide]
5. Manual update will be done using Odin utility which support Windows system only for now.

How To Root Galaxy Note 4 SM-N910W8 (Canada) Running On Official Firmware:

  1. Download Odin v3.09 and CF-Auto-Root Zip.
  2. Extract CF-Auto-Root zip file that you downloaded earlier from above link, you will get a .tar.md5 file.
  3. Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
  4. Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
  5. Now, put the Galaxy Note 4 SM-N910W8 (Canada) in Download Mode by pressing and holding down the Home & Volume Down button together while pressing the Power button. You will soon see a warning screen; press Volume Up button to enter Download Mode.
  6. Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
  7. When all done, connect your device to your PC using USB cable. You will see an “Added!!” massage in Odin’s message box. Try other USB port, preferably USB port located in back in your desktop PC if you don’t see the Added massage. In case, the solution don’t work then re-install USB driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
  8. Click the AP Button, and select that CF-Auto-Root-trltecan-trltecan-smn910w8.tar.md5 file that you get in Step 2. If you using an earlier version of Odin then add the file to PDA button.
  9. In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected (default set up).
  10. Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.
  11. Once flashing completed, your Galaxy Note 4 SM-N910W8 (Canada) will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer. In case, you want to flash another file via Odin then hit Reset button.

 

Leave a Reply