Bell HTC One M9 Network Remote sim unlock pin to use WorldWide

HTC One M9 Overview:
With a premium all-metal unibody, the beautiful One M9 doesn’t stray away from HTC’s gorgeous design tradition for its flagship line. For the first time in recent memory, we are also getting a high-res rear camera on an HTC finest – a 20 MP shooter – while the Ultra Pixel camera is moved at the front for perfect selfies. Add a scorching Snapdragon 810 chipset, 3 GB of DDR4 RAM, and 32 GB of storage out of the box, and the One M9 quickly elevates HTC to competitive status with any other phone thrown at it, and we didn’t even mention the new BoomSound speakers with Dolby surround sound at the front.

HTC One M9 Sim Unlocking
Unlock Bell HTC One M9 to use any where in the world with any supported service provider like

Optus Australia Brasil, Straight talk, FamilyMobile, Vodafone, Personal, Claro, O2, Digicel, Telcel, Orange, Telenor, Optus, Tele2, MTN Rogers, Fido, Chatr, Bell, Virgin, Sasktel, MTS, PC telecom, Tbaytel, Telus, Koodo

Only at

Click here to buy Unlock code

HTC One M9 Unlocking instructions
1 Turn on phone with Not Accepted SIM card.
2 A menu will pop up to Insert the code.
3 Insert the provided code and press OK
4 Device is now unlocked.

How to Factory Reset Hard Reset [B]HTC One M9
How to Reset HTC One M9 pattern lock


[CENTER][B][COLOR=#ff8c00][CENTER][FONT=Roboto Slab]Hard Reset will erase all of your data[FONT]
All described operations you are doing at your own risk.[CENTER]

[B][COLOR=#008000][SIZE=4][FONT=century gothic]First Method[FONT][SIZE][COLOR][B]

  1. In order to switch off your device press the[B] Power key[B] for a short while.
  2. Press and hold [B]Volume Down [B]+[B] Power button[B] at the same time for a couple of seconds.
  3. When you see the three Android images, then release held keys.

  4. Then press [B]Volume Down[B] to select option [B]Factory rese[B][B]t[B], and press [B]Power button [B]to confirm.
  5. Good job! The hard reset has just been performed.

[COLOR=#008000][SIZE=4][FONT=century gothic][B]Second Method[B][FONT][SIZE][COLOR]

  1. If the display is off, press the [B]Power button[B] to turn it back on.
  2. Then from [B]Main Menu [B]go to[B] Settings[B] and tap [B]Backup & reset[B].
  3. Afterwards choose[B] Reset[B] phone and select[B] Erase all data[B].
  4. Tap [B]OK[B] to confirm your choice.
  5. Success! Your device is ready to use.

[COLOR=#FF0000][SIZE=4][B]How to Update [B][SIZE][COLOR][B][B][COLOR=#ff0000][SIZE=4]HTC One M9[SIZE][COLOR][B][COLOR=#ff0000][SIZE=4] to latest [SIZE][COLOR][B][COLOR=#ff0000][SIZE=4][B]Firmware[B][SIZE][COLOR]

This software upgrade available for your HTC One provides the following key enhancements

  • Camera improvements
  • Thermal improvements
  • Various bug fixes and improvements

Before you proceed, please confirm that this software upgrade to [B]1.32.502.31[B] is a newer version than what is currently loaded on your device. If it is the same version, there is no need to reload the software. Navigate to the Home screen then tap [B]All apps[B] [B]Settings[B] [B]About[B] [B]Software Information[B] and locate the [B]Software version[B] . If your Software number is less than [B]1.32.502.31[B] , you should proceed with the upgrade.

[B]WARNING During the upgrade process the device will reboot multiple times and show software upgrade screens. Do not remove the AC charger as this might stop the update and your device may be rendered inoperable! [B]

[COLOR=#FF0000][B]Getting Started[B][COLOR]
Before you proceed with the update, make sure you have done the following

  • Set aside approximately 20 minutes to allow the device to update
  • Connect the device to a charger
  • Ensure the battery is charged to at least 35%
  • Ensure the device is connected to AT&T 4GLTE and a stable Wi-Fi network

[SIZE=3][COLOR=#b22222][FONT=century gothic][B]Installation Instructions[B][FONT][COLOR][SIZE]
To download and install the update from the device, follow these steps below

1. From the Home screen tap [B]All apps[B] , tap [B]Settings[B] .
2. Tap [B]AT&T Software Update[B] .
3. Tap [B]Check for updates[B] .
4. Tap [B]Continue[B] to download the update.
5. If downloading the update using the mobile data network (not connected to Wi-Fi), you may be prompted with a data fee warning message. If this is acceptable, tap [B]YES[B] to start the upgrade process.
6. Status of the download can be checked in the Notifications pull down.
7. Once the download is complete, the user will be prompted to install from the Notifications pull down. Tap the System update to begin the upgrade process.
8. Tap [B]OK[B] to begin the update process to software version [B]1.32.502.31[B] .

[B]WARNING During the upgrade process the device will reboot multiple times and show software upgrade screens. Do not remove the AC charger as this might stop the update and your device may be rendered inoperable! [B]

9. Device will reboot and begin installation. Users will not be able to use their device during the installation process (approximately 10 Minutes).
10. The system update is complete. Tap [B]OK[B] to continue.

[COLOR=#FF0000][SIZE=4][B]How to Root [B][SIZE][COLOR][B][B][COLOR=#ff0000][SIZE=4]HTC One M9[SIZE][COLOR][B][COLOR=#FF0000][SIZE=4]


You will lose all your data and it is possible that you may brick your device

All described operations you are doing at your own risk.

[B][COLOR=#FF0000]Step 1[COLOR] [B]Before rooting the One M9, the bootloader of the handset must be unlocked. This can be achieved by heading over to []HTC’s Dev website[URL] which has a detailed step-by-step guide on how to unlock the bootloader along with download links for all the files required during the process. Users, however, are first required to register on the site.

[COLOR=#daa520]Once the boot loader has been unlocked, the device will reboot into Android OS.[COLOR]

[B][COLOR=#FF0000]Step 2[COLOR] [B]After setting up the device again, transfer the []SuperSU ZIP file to the internal storage[URL] of the One M9. With the bootloader unlocked, it is now time to install TWRP recovery on the handset.
TWRP recovery for One M9 can be [URL=”“]downloaded from here[URL].
Step 3 [COLOR][B]Transfer the TWRP recovery image file to the same folder containing the ADBFastboot that was created while unlocking the bootloader of the handset in Step 1. Also, make sure to rename the file to something simpler like “twrp.img”.

[B][COLOR=#FF0000]Step 4[COLOR][B] In the same command prompt window that was used in Step 1 to unlock the bootloader of the One M9, enter the following command
[I]adb devices[I]

[I][COLOR=#daa520]Note [COLOR][I][COLOR=#daa520]Mac owners, make sure to prefix a “.” before executing any fastboot or ADB command.[COLOR]

This command will confirm whether the One M9 is being successfully detected by the computer or laptop it is connected to or not.

Proceed to reboot the handset into fastboot mode by entering the following command
[I]adb reboot bootloader[I]

Once the device boots into the bootloader mode, use the Volume keys to navigate to the [I]fastboot [I]option and confirm the selection by pressing the Power key.

Step 5 Now, enter the following commands one by one
fastboot flash recovery twrp.img
fastboot reboot

If all the steps mentioned above were followed properly, TWRP recovery must have been successfully installed on the One M9.

[B][COLOR=#FF0000]Step 6[COLOR][B] Once the recovery has been installed, it is now time to gain root access on the One M9 by flashing SueprSU. Switch off the handset once again and proceed to reboot it into bootloader mode by pressing the Volume Down + Power button simultaneously. Then, navigate to the [I]Recovery [I]option using the volume keys and confirm the selection by pressing the Power button.

After the One M9 has boot into recovery, tap the ‘Install’ button and select the SuperSU ZIP file. Once the ZIP file has been installed, reboot the handset by selecting the ‘Reboot system’ now button.

The first boot after installing SuperSU might take some time as Android OS needs to rebuild cache for some of the apps. After the device has booted back into Android, open the SuperSU app to make sure that it does not need to update its binary. If not, then the One M9 has been successfully rooted.

Since there is a custom recovery installed on the handset as well, installing a custom ROM down the line — if the user wishes to — will be easier as well.

Leave a Reply