Desbloqueo Sasktel LG G4 H815 NCK?

LG G4 H815 Overview :
The LG G4 certainly isn’t the “radically different” smartphone LG executives promised, but it isn’t last year’s phone either. The new kid in town features significant hardware improvements in the form of a quantum dot LCD IPS QHD display, a 64-bit hexa-core Snapdragon 808 processor, a 16MP rear camera full of innovative technology (three-axis OIS, Color Spectrum Sensor), better battery life, and much more! The smartphone is available in Metallic Gray, Ceramic White, and Genuine Leather finishes.

LG G4 H815 Sim Unlocking :
Unlock Sasktel LG G4 H815 to use any where in the world with any supported service provider like

Optus Australia Brasil, Straight talk, FamilyMobile, Vodafone, Personal, Claro, O2, Digicel, Telcel, Orange, Telenor, Optus, Tele2, MTN Rogers, Fido, Chatr, Bell, Virgin, Sasktel, MTS, PC telecom, Tbaytel, Telus, Koodo


Only at


http://Unlock.CanadaGSM.ca/

Click here to buy Unlock code

LG G4 H815 Unlocking instructions:
1: Turn on phone with Not Accepted SIM card.
2: A menu will pop up to Insert the code.
3: Insert the provided code and press OK
4: Device is now unlocked.

How to Factory reset/ Hard Reset LG G4 H815:
How to Reset LG G4 H815 pattern lock:

WARNING !
Hard Reset will erase all of your data
All described operations you are doing at your own risk.

First Method:

  1. The cell phone must be turned off, so hold down the Power key for a short while.
  2. In the next step press and hold the Volume Down + Power button together for a couple of seconds.
  3. When the LG logo appers on the screen, release the Power key, keep pressing the Volume Down and then press once more the Power button.
  4. After that you should see the factory reset menu on your screen.
  5. You should confirm process by choosing appropriate options. Use Volume rockers to navigate and Power button to confirm.
  6. Wait to complete the operation.
  7. Success! The hard reset has just been completed.

Second Method:

  1. If the display is off hold down the Power button to turn it back on.
  2. In the next step go to Settings.
  3. Afterwards select General and then Backup & Reset.
  4. Then tap Factory Data Reset and Reset Phone.
  5. Choose Erase Everything if you are sure you want to clear all your data.
  6. Select OK to confirm the whole operation.
  7. Well done! Your phone is ready to use.

How to Update LG Escape 2 to Latest Firmware:

  1. On the computer, launch LGMobile Support Tool.

  2. Connect the phone to the computer using the USB cable.

  3. You’ll be prompted if an update is available. Click Start Updating.

  4. Read the warning and click Yes.

  5. The update process will now begin.

  6. The software will be downloaded to the computer.

  7. Wait while the software is installed on the phone.
    Note: Do not disconnect the USB cable from the phone during this process.

  8. The update is complete. Click Exit and Disconnect the phone.

How to Root LG G4 H815:

WARNING !
You will lose all your data and it is possible that you may brick your device
All described operations you are doing at your own risk.

Chainfire’s SuperSU root tool now supports the LG G4, allowing users to install root, change system partition and use apps that require root permission such as Titanium backup, Exposed and its modules.

The root is currently available for the H815 model of G4, the international European model. This is because its manufacturer is allowing unlocking of bootloader for the aforementioned model only. Other variants will have to wait as LG has promised to add more devices with unlockable bootloaders.

Once the bootloader is unlocked, installing the root is as simple as flashing any other recovery flash-able file. Following is a step-by-step guide to root the new LG phone.

Important points

  • The following root method is for the LG G4 H815 only. Do not apply this on any other device.

 

  • Ensure that you have created a backup of all the data of your phone, as the root method is likely to wipe out everything.

 

  • Rooting the device will void the manufacturer’s warranty.

 

  • The battery of the phone should have at least 80% charge to avoid any sudden shut down due to lack of power, which could damage the device.

 

  • IBTimes UK will not be held liable for any damage to the device during the process. Proceed at your own risk.

How to root LG G4 H815 with SuperSU:

Step-1: Unlock the bootloader of LG G4. This step is must, as without unlocking the device you will not be able to install custom recovery

Step-2: Install ADB and LG drivers (Windows ll Mac)

Step-3: Install TWRP recovery

Step-4: Download SuperSU root package

File name: UPDATE-SuperSU-v2.46.zip

Step-5: Connect the phone to your PC with USB

Step-6: Copy the root package to the phone’s storage and remember the location

Step-7: Reboot the phone into recovery mode. Open a command window in the folder where you have saved the TWRP recovery. Hold the Shift key, right-click on an empty space inside the folder. A drop down menu will show up, select Open Command Window Here
A command (cmd) window will open. Execute the following command in the command window and press Enter

  • adb reboot recovery

Step-8: In recovery, tap on Install then browse to the location where you have saved the SuperSU file, select it and do a swipe on the Swipe to Confirm Flash option

Step-9: On the next screen you should see successful written in blue text. Reboot the phone by selecting Reboot>> System. Wait until the phone boots up

You will now be able to enjoy root apps on your G4.

Desbloquear Sasktel LG Código G2 trabajar con Rogers, móviles Acceso

LG G2 / D803 / D802 / D801 Overview :
The LG G2 is a high-end Android smartphone – an embodiment of cutting-edge hardware and precision-polished software, sprinkled with a handful of innovative goodies all over. It comes with top-of-the-line specifications, including a 5.2-inch, 1080p display made using IPS LCD technology, a quad-core Snapdragon 800 chip running at 2.3GHz, and 2GB of RAM. In terms of performance, the device should rank among the best handsets to date. Further down the list we have an advanced 13MP camera that stands out with cool features like optical image stabilization and 1080p video capturing at 60 frames per second. A notable multimedia feature is the support for 24-bit, 192kHz audio. The design of the LG G2 is quite unusual for its volume and power buttons are placed on the back. Its thickness of 9 millimeters is acceptable considering that inside the phone you’ll find a 3000mAh removable battery. 32GB of on-board storage are present, expandable further through the use of a microSD card (in some markets).

LG G2 / D803 / D802 / D801 Sim Unlocking :
Unlock Sasktel LG G2 / D803 / D802 / D801 to use any where in the world with any supported service provider like

Optus Australia Brasil, Straight talk, FamilyMobile, Vodafone, Personal, Claro, O2, Digicel, Telcel, Orange, Telenor, Optus, Tele2, MTN Rogers, Fido, Chatr, Bell, Virgin, Sasktel, MTS, PC telecom, Tbaytel, Telus, Koodo


Only at


http://unlock.canadagsm.ca/

Click here to buy Unlock code

LG G2 / D803 / D802 / D801 Unlocking instructions:
1: Turn on phone with Not Accepted SIM card.
2: A menu will pop up to Insert the code.
3: Insert the provided code and press OK
4: Device is now unlocked.

Method 2
1: Turn on phone without any sim card and dial 2945#*803# or 2945#*802# or 2945#*801#
2: A menu will pop up chose option 1 ( Network unlock ).
3: Insert the provided code and press OK
4: Device is now unlocked.

How to Factory reset/ Hard Reset LG G2 / D803 / D802 / D801:
How to Reset LG G2 / D803 / D802 / D801 pattern lock:

WARNING !
Hard Reset will erase all of your data
All described operations you are doing at your own risk.

First Method:

  1. At the beginning power off your cell phone.

    Attachment 127682

  2. Afterwards, press Volume Down button and Power Button together until the LG logo appears on the screen.

    Attachment 127683

  3. When the LG logo is displayed, let go of the Power Button, keep pressing the Volume Down key and then press once more the Power Button.
  4. Now, you should see factory reset menu.

    Attachment 127684

  5. Then confirm process by pressing Power button twice.

    Attachment 127682

  6. Now your phone should restart.
  7. Success! The hard reset has just been completed.

Second Method:

  1. Turn on the phone by using the Power button.

    Attachment 127682

  2. Afterwards go to Settings.
  3. Select General and then Backup & reset.
  4. Tap Reset Phone.
  5. Choose Erase Everything if you are sure you want to clear all your data.
  6. Select OK to confirm the whole operation.
  7. Well done!

How to Update LG G2 to Latest Firmware:

  1. On the computer, launch LG Mobile Support Tool.

  2. Connect the phone to the computer using the USB cable.

  3. You’ll be prompted if an update is available. Click Start Updating.

  4. Read the warning and click Yes.

  5. The update process will now begin.

  6. The software will be downloaded to the computer.

  7. Wait while the software is installed on the phone.
    Note: Do not disconnect the USB cable from the phone during this process.

  8. The update is complete. Click Exit and Disconnect the phone.

How to Root LG G2:

WARNING !
You will lose all your data and it is possible that you may brick your device
All described operations you are doing at your own risk.

Step 1. Go to Settings -> About Phone -> Software Info then hit on the “Build Number” about 5 times until it says “You are now a developer”.

Step 2. Hit back button twice and now you should see “Developer options”, select it.

Step 3. Make sure “USB Debugging” is checked ON.

Step 4. Connect a micro-USB cable from your LG phone to your computer.

Step 5. Download LG_Root.zip and unzip the files. You should get a folder called “LG_Root” in your Downloads directory like shown below:

Download: Download LG_Root.zip

Step 6. Make sure you have proper drivers installed. Go to Device Manager and find “ADB Interface”. If you don’t see it, download LG Drivers and install it. Then you should be able to see it.

Download Drivers: Download LG G2 Drivers for Windows
For Verizon LG devices, Download the Verizon LG driver Instead!!!

Step 7. Open a command prompt then type:
cd Downloads
cd LG_Root
adb devices

Then unplug and plug the micro-USB on your phone until you see “Allow USB Debugging” on the phone.
Select “Always alllow from this computer” then hit “OK”.
Type “adb devices” and you should see a serial number along with “device”. If you see this you are ready to rock!

Step 8. Next copy and paste the following:
adb.exe push busybox /data/local/tmp/ && adb.exe push lg_root.sh /data/local/tmp && adb.exe push UPDATE-SuperSU-v2.46.zip /data/local/tmp

For some reason, above code gets cut off, try copying and pasting this here:
adb.exe push busybox /data/local/tmp/ && adb.exe push lg_root.sh /data/local/tmp && adb.exe push UPDATE-SuperSU-v2.46.zip /data/local/tmp

Step 9. Power off your LG phone and unplug the micro-USB cable. Then WHILE HOLDING DOWN the Volume Up button, plug in the micro-USB cable. You should see “Downloading…”.

And after few seconds it should turn to “Firmware Update”.

Step 10. Next, double-click on “ports.bat” and read the COM number next to “DIAG1″. (Note, some users have reported you must do Right Click->Run As Administrator to get this step working although I didn’t have to.)

Step 11. Next, type:
Send_Command.exe \\.\COM24

But replace COM24 with the COM number you found in Step 10.
Then type:
sh /data/local/tmp/lg_root.sh dummy 1 /data/local/tmp/UPDATE-SuperSU-v2.46.zip /data/local/tmp/busybox

Step 12. If you have an LG phone with removable battery, simply pull battery and put it back in. For phones without removable battery like the LG G Flex 2, hold down Volume Up and Power buttons together for 30 Seconds until your phone reboots.

Step 13. Once rebooted, you should find SuperSU app in your app drawer and a fully rooted phone!

Congratulations, you’ve successfully rooted your LG G2 (or other LG smartphone) on Lollipop!

 

VIENTO Canadá LG F4N Red de desbloquear el bloqueo de trabajar con diferentes proveedores de sim

LG F4N Overview :
Тхе LG F4N features a 2.2-inch TFT display, Qualcomm QSC6270 SOC, 1.3-megapixels camera and Bluetooth 2.1.

LG F4N Sim Unlocking:
Unlock WIND Canada LG F4N to use any where in the world with any supported service provider like

Optus Australia Brasil, Straight talk, FamilyMobile, Vodafone, Personal, Claro, O2, Digicel, Telcel, Orange, Telenor, Optus, Tele2, MTN Rogers, Fido, Chatr, Bell, Virgin, Sasktel, MTS, PC telecom, Tbaytel, Telus, Koodo


Only at


http://Unlock.CanadaGSM.ca/

Click here to buy Unlock code

LG F4N Unlocking instructions:
1: Turn on phone with Not Accepted SIM card.
2: A menu will pop up to Insert the code.
3: Insert the provided code and press OK
4: Device is now unlocked.

How to Update LG F4N to latest Firmware:

  1. On the computer, launch LG Mobile Support Tool.

  2. Connect the phone to the computer using the USB cable.

  3. You’ll be prompted if an update is available. Click Start Updating.

  4. Read the warning and click Yes.

  5. The update process will now begin.

  6. The software will be downloaded to the computer.

  7. Wait while the software is installed on the phone.
    Note: Do not disconnect the USB cable from the phone during this process.

  8. The update is complete. Click Exit and Disconnect the phone.

 

AT & T LG G3 Simcode Desbloqueo de usar con TIM Brasil, T-Mobile EE.UU., Telcel

LG G3 D850/D851/D855/D852 Overview :
The new LG G3 flagship sports 5.5-inch, 1440 x 2560 (QHD) pixel resolution screen, which provides the super-crisp, 538 pixels per inch. Dimensions are pretty compact for the screen size, resulting in excellent 76.4% screen to body size ratio. The Android 4.4 KitKat-based handset is powered by a quad-core Snapdragon 801 and 3GB of LPDDR3 RAM. It features 32GB of internal storage and a microSD slot. The main 13-megapixel rear shooter comes with the company’s improved Optical Image Stabilization+ and has a laser auto focus assist beam, which delivers fast focus even in low light scenarios. The 2.1-megapixel front-facing cam comes with an “enhanced selfie mode”.

LG G3 D850/D851/D855/D852 Sim Unlocking :
Unlock AT&T LG G3 D850/D851/D855/D852 to use any where in the world with any supported service provider like

Optus Australia Brasil, Straight talk, FamilyMobile, Vodafone, Personal, Claro, O2, Digicel, Telcel, Orange, Telenor, Optus, Tele2, MTN Rogers, Fido, Chatr, Bell, Virgin, Sasktel, MTS, PC telecom, Tbaytel, Telus, Koodo


Only at


http://www.WorldGSMCodes.com/

Click here to buy Unlock code

LG G3 D850/D851/D855/D852 Unlocking instructions:
1: Turn on phone with Not Accepted SIM card.
2: A menu will pop up to Insert the code.
3: Insert the provided code and press OK
4: Device is now unlocked.

How to Factory reset/ Hard Reset LG G3 D850/D851/D855/D852:
How to Reset LG G3 D850/D851/D855/D852 pattern lock:

WARNING !
Hard Reset will erase all of your data
All described operations you are doing at your own risk.

First Method:

  1. Firstly switch off your device.

    Name:  01.jpg
Views: 76
Size:  154.7 KB

  2. After that press Volume Down button and Power Button together until the LG logo appears on the screen.

    Name:  02.jpg
Views: 72
Size:  159.6 KB

  3. When the LG logo is displayed, let go of the Power Button, keep pressing the Volume Down key and then press once more the Power Button.
  4. You should see a factory reset menu on your screen.

    Name:  03.jpg
Views: 61
Size:  123.1 KB

  5. You should confirm processby choosing appropriate options. Use Volume rockers to navigate and Power button to confirm.
  6. Wait to complete the operation.
  7. Success! The hard reset has just been completed.

Second Method:

  1. Turn on the phone by using the Power button.
  2. Afterwards go to Settings.
  3. Select General and then Backup & reset.
  4. Tap Reset Phone.
  5. Choose Erase Everything if you are sure you want to clear all your data.
  6. Select OK to confirm the whole operation.
  7. Well done!

How to Update LG G3 to Latest Firmware:

  1. On the computer, launch LG Mobile Support Tool.

  2. Connect the phone to the computer using the USB cable.

  3. You’ll be prompted if an update is available. Click Start Updating.

  4. Read the warning and click Yes.

  5. The update process will now begin.

  6. The software will be downloaded to the computer.

  7. Wait while the software is installed on the phone.
    Note: Do not disconnect the USB cable from the phone during this process.

  8. The update is complete. Click Exit and Disconnect the phone.

How to Root LG G3 D850/D851/D855/D852:

WARNING !
You will lose all your data and it is possible that you may brick your device
All described operations you are doing at your own risk.


Check out the following root guide if you want to achieve root on your LG G3 using the one click script.

Name:  One-Click-Script-root-new-lg.jpg
Views: 66
Size:  55.7 KB

Important points

  • Create a backup of all important data of the phone before following the root guide.
  • Ensure that the LG device is having above 80% battery.
  • Rooting your device will void the manufacturer’s warranty.
  • The One click script root supports the aforementioned LG smartphones only. Do not apply this on any other variant.
  • IBTimes UK will not be held liable for any damage to the device.

Download links

One click script [File name: LG driversLG_Root_Script_by_avicohh.exe]
LG drivers [File name: LGUnitedMobileDriver_S51MAN313AP22_ML_WHQL_Ver_3.1 3.2.exe]

How to root LG G3 on LG Android 5.0 Lollipop Firmwares:


Step-1:
Install LG drivers on your PC if you have not

Step-2: Download the root script and extract it to the same folder. (Double click on the 7z exe file)
Step-3: Enable USB debugging on your LG G3.
Go to Settings >> General >> About Phone >> Software Information >> Tap on Build Number seven times. Again go to Settings >> Developer Options and turn USB Debugging On

Step-4: Connect your phone to the PC using USB cable
Step-5: Double click on LG Root Script.bat file, to run the script
Step-6: Follow the on-screen instructions
Step-7: If your phone does not recognise, try switching between MTP and PTP options
Step-8: In case you get MSVCR100.dll is missing error, install Visual C++ Reditributable


Download links:
32 bit/ 64 bit

Your LG G3 should now be rooted on Android Lollipop firmware.
Source: XDA

¿Cómo puedo desbloquear AT & T LG G2 Código de trabajar con Optus Australia, SFR Francia

LG G2 / D803 / D802 / D801 Overview :
The LG G2 is a high-end Android smartphone – an embodiment of cutting-edge hardware and precision-polished software, sprinkled with a handful of innovative goodies all over. It comes with top-of-the-line specifications, including a 5.2-inch, 1080p display made using IPS LCD technology, a quad-core Snapdragon 800 chip running at 2.3GHz, and 2GB of RAM. In terms of performance, the device should rank among the best handsets to date. Further down the list we have an advanced 13MP camera that stands out with cool features like optical image stabilization and 1080p video capturing at 60 frames per second. A notable multimedia feature is the support for 24-bit, 192kHz audio. The design of the LG G2 is quite unusual for its volume and power buttons are placed on the back. Its thickness of 9 millimeters is acceptable considering that inside the phone you’ll find a 3000mAh removable battery. 32GB of on-board storage are present, expandable further through the use of a microSD card (in some markets).

LG G2 / D803 / D802 / D801 Sim Unlocking :
Unlock AT&T LG G2 / D803 / D802 / D801 to use any where in the world with any supported service provider like

Optus Australia Brasil, Straight talk, FamilyMobile, Vodafone, Personal, Claro, O2, Digicel, Telcel, Orange, Telenor, Optus, Tele2, MTN Rogers, Fido, Chatr, Bell, Virgin, Sasktel, MTS, PC telecom, Tbaytel, Telus, Koodo


Only at


http://www.WorldGSMCodes.com/

Click here to buy Unlock code

LG G2 / D803 / D802 / D801 Unlocking instructions:
1: Turn on phone with Not Accepted SIM card.
2: A menu will pop up to Insert the code.
3: Insert the provided code and press OK
4: Device is now unlocked.

Method 2
1: Turn on phone without any sim card and dial 2945#*803# or 2945#*802# or 2945#*801#
2: A menu will pop up chose option 1 ( Network unlock ).
3: Insert the provided code and press OK
4: Device is now unlocked.

How to Factory reset/ Hard Reset LG G2 / D803 / D802 / D801:
How to Reset LG G2 / D803 / D802 / D801 pattern lock:

WARNING !
Hard Reset will erase all of your data
All described operations you are doing at your own risk.

First Method:

  1. At the beginning power off your cell phone.

    Name:  01.jpg
Views: 58
Size:  105.3 KB

  2. Afterwards, press Volume Down button and Power Button together until the LG logo appears on the screen.

    Name:  02.jpg
Views: 39
Size:  110.3 KB

  3. When the LG logo is displayed, let go of the Power Button, keep pressing the Volume Down key and then press once more the Power Button.
  4. Now, you should see factory reset menu.

    Name:  03.jpg
Views: 40
Size:  65.4 KB

  5. Then confirm process by pressing Power button twice.

    Name:  01.jpg
Views: 58
Size:  105.3 KB

  6. Now your phone should restart.
  7. Success! The hard reset has just been completed.

Second Method:

  1. Turn on the phone by using the Power button.

    Name:  01.jpg
Views: 58
Size:  105.3 KB

  2. Afterwards go to Settings.
  3. Select General and then Backup & reset.
  4. Tap Reset Phone.
  5. Choose Erase Everything if you are sure you want to clear all your data.
  6. Select OK to confirm the whole operation.
  7. Well done!

How to Update LG G2 to Latest Firmware:

  1. On the computer, launch LG Mobile Support Tool.

  2. Connect the phone to the computer using the USB cable.

  3. You’ll be prompted if an update is available. Click Start Updating.

  4. Read the warning and click Yes.

  5. The update process will now begin.

  6. The software will be downloaded to the computer.

  7. Wait while the software is installed on the phone.
    Note: Do not disconnect the USB cable from the phone during this process.

  8. The update is complete. Click Exit and Disconnect the phone.

How to Root LG G2:

WARNING !
You will lose all your data and it is possible that you may brick your device
All described operations you are doing at your own risk.

Step 1. Go to Settings -> About Phone -> Software Info then hit on the “Build Number” about 5 times until it says “You are now a developer”.

Step 2. Hit back button twice and now you should see “Developer options”, select it.

Step 3. Make sure “USB Debugging” is checked ON.

Step 4. Connect a micro-USB cable from your LG phone to your computer.

Step 5. Download LG_Root.zip and unzip the files. You should get a folder called “LG_Root” in your Downloads directory like shown below:

Download:
Download LG_Root.zip

Step 6. Make sure you have proper drivers installed. Go to Device Manager and find “ADB Interface”. If you don’t see it, download LG Drivers and install it. Then you should be able to see it.

Download Drivers: Download LG G2 Drivers for Windows
For Verizon LG devices, Download the Verizon LG driver Instead!!!

Step 7. Open a command prompt then type:
cd Downloads
cd LG_Root
adb devices

Then unplug and plug the micro-USB on your phone until you see “Allow USB Debugging” on the phone.
Select “Always alllow from this computer” then hit “OK”.
Type “adb devices” and you should see a serial number along with “device”. If you see this you are ready to rock!

Step 8. Next copy and paste the following:
adb.exe push busybox /data/local/tmp/ && adb.exe push lg_root.sh /data/local/tmp && adb.exe push UPDATE-SuperSU-v2.46.zip /data/local/tmp

For some reason, above code gets cut off, try copying and pasting this here:
adb.exe push busybox /data/local/tmp/ && adb.exe push lg_root.sh /data/local/tmp && adb.exe push UPDATE-SuperSU-v2.46.zip /data/local/tmp

Step 9. Power off your LG phone and unplug the micro-USB cable. Then WHILE HOLDING DOWN the Volume Up button, plug in the micro-USB cable. You should see “Downloading…”.

And after few seconds it should turn to “Firmware Update”.

Step 10. Next, double-click on “ports.bat” and read the COM number next to “DIAG1″. (Note, some users have reported you must do Right Click->Run As Administrator to get this step working although I didn’t have to.)

Step 11. Next, type:
Send_Command.exe \\.\COM24

But replace COM24 with the COM number you found in Step 10.
Then type:
sh /data/local/tmp/lg_root.sh dummy 1 /data/local/tmp/UPDATE-SuperSU-v2.46.zip /data/local/tmp/busybox

Step 12. If you have an LG phone with removable battery, simply pull battery and put it back in. For phones without removable battery like the LG G Flex 2, hold down Volume Up and Power buttons together for 30 Seconds until your phone reboots.

Step 13. Once rebooted, you should find SuperSU app in your app drawer and a fully rooted phone!

Congratulations, you’ve successfully rooted your LG G2 (or other LG smartphone) on Lollipop!

 

Desbloquear AT & T LG G Flex 2 Red Código de usar con Vivo Brasil, Tele2

LG G Flex 2 Overview :
The LG G Flex 2 is bent and curved to different degrees alongside its length, with the aim of feeling more ergonomic to the user. It is also the first Android smartphone to feature Qualcomm’s 64-bit octa-core Snapdragon 810 processor, DDR4 RAM, and a plastic OLED display with a 1080p resolution. Other innovative features are its self-healing back panel covering and a fast-charging 3000mAh battery.

LG G Flex 2 Sim Unlocking :
Unlock AT&T LG G Flex 2 to use any where in the world with any supported service provider like

Optus Australia Brasil, Straight talk, FamilyMobile, Vodafone, Personal, Claro, O2, Digicel, Telcel, Orange, Telenor, Optus, Tele2, MTN Rogers, Fido, Chatr, Bell, Virgin, Sasktel, MTS, PC telecom, Tbaytel, Telus, Koodo


Only at


http://www.WorldGSMCodes.com/

Click here to buy Unlock code

LG G Flex 2 Unlocking instructions:
1: Turn on phone with Not Accepted SIM card.
2: A menu will pop up to Insert the code.
3: Insert the provided code and press OK
4: Device is now unlocked.

How to Factory Reset/ Hard Reset LG G Flex 2:
How to Reset LG G Flex 2 pattern lock:

WARNING !
Hard Reset will erase all of your data
All described operations you are doing at your own risk.

First Method:

  1. At the very beginning switch off the device by holding the Power key.

    Name:  01.jpg
Views: 130
Size:  119.7 KB

  2. Then hold down the Volume Down + Power button together..

    Name:  02.jpg
Views: 110
Size:  123.2 KB

  3. When the LG logo is displayed, let go of the Power key, keep pressing the Volume Down and then press once more the Power button.
  4. Afterwards you should see a factory reset menu on your screen.

    Name:  03.jpg
Views: 88
Size:  124.2 KB

  5. Confirm processby choosing appropriate options using Volume rockers to navigate and Power button to confirm.
  6. Now your phone should restart.
  7. Success! The hard reset has just been completed.

Second Method:

  1. If the display is off hold down the Power button to turn it back on.

    Name:  01.jpg
Views: 130
Size:  119.7 KB

  2. Afterwards go to Settings.
  3. Select General and then Backup & reset.
  4. Tap Reset Phone.
  5. Choose Erase Everything if you are sure you want to clear all your data.
  6. Select OK to confirm the whole operation.
  7. Well done!

How to Update LG Escape 2 to Latest Firmware:

  1. On the computer, launch LGMobile Support Tool.

  2. Connect the phone to the computer using the USB cable.

  3. You’ll be prompted if an update is available. Click Start Updating.

  4. Read the warning and click Yes.

  5. The update process will now begin.

  6. The software will be downloaded to the computer.

  7. Wait while the software is installed on the phone.
    Note: Do not disconnect the USB cable from the phone during this process.

  8. The update is complete. Click Exit and Disconnect the phone.

How to Root LG G Flex 2:

WARNING !
You will lose all your data and it is possible that you may brick your device
All described operations you are doing at your own risk.

Step 1. Go to Settings -> About Phone -> Software Info then hit on the “Build Number” about 5 times until it says “You are now a developer”.

Step 2. Hit back button twice and now you should see “Developer options”, select it.

Step 3. Make sure “USB Debugging” is checked ON.

Step 4. Connect a micro-USB cable from your LG phone to your computer.

Step 5. Download LG_Root.zip and unzip the files. You should get a folder called “LG_Root” in your Downloads directory like shown below:

Download:

Download LG_Root.zip

Step 6. Make sure you have proper drivers installed. Go to Device Manager and find “ADB Interface”. If you don’t see it, download LG Drivers and install it. Then you should be able to see it.

Download Drivers:Download LG G Flex 2 Drivers for Windows (Works for most LG devices including LG G Flex 2, G2, G3, etc…etc…)

For Verizon LG devices, download the Verizon LG driver instead!!!

Step 7. Open a command prompt then type:

cd Downloads

cd LG_Root
adb devices

Then unplug and plug the micro-USB on your phone until you see “Allow USB Debugging” on the phone.
Select “Always alllow from this computer” then hit “OK”.
Type “adb devices” and you should see a serial number along with “device”. If you see this you are ready to rock!

Step 8. Next copy and paste the following:

adb.exe push busybox /data/local/tmp/ && adb.exe push lg_root.sh /data/local/tmp && adb.exe push UPDATE-SuperSU-v2.46.zip /data/local/tmp

For some reason, above code gets cut off, try copying and pasting this here:

adb.exe push busybox /data/local/tmp/ && adb.exe push lg_root.sh /data/local/tmp && adb.exe push UPDATE-SuperSU-v2.46.zip /data/local/tmp

Step 9. Power off your LG phone and unplug the micro-USB cable. Then WHILE HOLDING DOWN the Volume Up button, plug in the micro-USB cable. You should see “Downloading…”.

And after few seconds it should turn to “Firmware Update”.

Step 10. Next, double-click on “ports.bat” and read the COM number next to “DIAG1″. (Note, some users have reported you must do Right Click->Run As Administrator to get this step working although I didn’t have to.)

Step 11. Next, type:

Send_Command.exe \\.\COM24


But replace COM24 with the COM number you found in Step 10.

Then type:

sh /data/local/tmp/lg_root.sh dummy 1 /data/local/tmp/UPDATE-SuperSU-v2.46.zip /data/local/tmp/busybox

Step 12. If you have an LG phone with removable battery, simply pull battery and put it back in. For phones without removable battery like the LG G Flex 2, hold down Volume Up and Power buttons together for 30 seconds until your phone reboots.

Step 13. Once rebooted, you should find SuperSU app in your app drawer and a fully rooted phone!

Congratulations, you’ve successfully rooted your LG G Flex 2 (or other LG smartphone) on Lollipop!

 

Desbloquear AT & T LG G Vista Simcard de usar con SFR Francia, Tim Brasil, Virgin UK

LG G Vista Overview :
The LG G Vista features 5.7-inch display with HD resolution, a quad-core Snapdragon 400 CPU under the hood along with the Adreno 305 GPU. 1.5GB of RAM is inside while 8GB of native storage is aboard. A 64GB capacity microSD slot is available for those who need more memory. Back and front cameras weigh in at 8MP and 1.3MP respectively, and a 3200mAh battery powers the whole shebang.

LG G Vista Sim Unlocking :
Unlock AT&T LG G Vista to use any where in the world with any supported service provider like

Optus Australia Brasil, Straight talk, FamilyMobile, Vodafone, Personal, Claro, O2, Digicel, Telcel, Orange, Telenor, Optus, Tele2, MTN Rogers, Fido, Chatr, Bell, Virgin, Sasktel, MTS, PC telecom, Tbaytel, Telus, Koodo

Only at


http://www.WorldGSMCodes.com/

Click here to buy Unlock code

LG G Vista Unlocking instructions:
1: Turn on phone with Not Accepted SIM card.
2: A menu will pop up to Insert the code.
3: Insert the provided code and press OK
4: Device is now unlocked.

How to Factory reset/ Hard Reset LG G Vista:
How to Reset LG G Vista pattern lock:

WARNING !
Hard Reset will erase all of your data
All described operations you are doing at your own risk.

First Method:

  1. At first switch off the device by holding the Power key.

    Name:  01.jpg
Views: 69
Size:  144.1 KB

  2. Then hold down the Volume Down and Power button together until the LG logo appears on the screen.

    Name:  02.jpg
Views: 66
Size:  147.8 KB

  3. When the LG logo is displayed, let go of the Power key, keep pressing the Volume Down and then press once more the Power button.
  4. Afterwards you should see a factory reset menu on your screen.

    Name:  03.jpg
Views: 63
Size:  124.2 KB

  5. Confirm process by choosing appropriate options using Volume rockers to navigate and Power button to confirm.
  6. Now your phone should restart itself
  7. Success! The hard reset has just been completed.

Second Method:

  1. If the display is off hold down the Power button to turn it back on.

    Name:  01.jpg
Views: 69
Size:  144.1 KB

  2. Afterwards go to Settings.
  3. Select General and then Backup & reset.
  4. Tap Reset Phone.
  5. Choose Erase Everything if you are sure you want to clear all your data.
  6. Select OK to confirm the whole operation.
  7. Well done!

How to Update LG Escape 2 to Latest Firmware:

  1. On the computer, launch LG Mobile Support Tool.

  2. Connect the phone to the computer using the USB cable.

  3. You’ll be prompted if an update is available. Click Start Updating.

  4. Read the warning and click Yes.

  5. The update process will now begin.

  6. The software will be downloaded to the computer.

  7. Wait while the software is installed on the phone.
    Note: Do not disconnect the USB cable from the phone during this process.

  8. The update is complete. Click Exit and Disconnect the phone.

How to Root LG G Vista:

WARNING !
You will lose all your data and it is possible that you may brick your device
All described operations you are doing at your own risk.


Instructions:

  1. Format your current SD card to EXT2 or EXT4 partition, just use a separate card and format it, if don’t want to risk your data.
  2. From this page download the root package.
  3. Place the root file on your desktop; don’t unzip the file.
  4. Connect your LG G Vista with your computer by plugging in the USB cord.
  5. Transfer the root file from desktop to the root of your phone’s SD card.
  6. Unplug the USB cable in the end.
  7. Enter your Android device in recovery mode; there use volume up and down buttons to scroll up and down and power button to select.
  8. Select “update from external SD card”. Pick the root package.
  9. Wait while your device is being rooted and in the end select “reboot system now”.
  10. If a boot loop will be issued, return to recovery and from there select “wipe data factory reset” followed by “wipe cache partition”- in the end choose “reboot system now” and you are done.

 


Congratulations, you have successfully rooted your LG G Vista.

¿Quieres Desbloquear AT & T LG G4 H815 para trabajar en todo el mundo con diferentes portadores

LG G4 H815 Overview :
The LG G4 certainly isn’t the “radically different” smartphone LG executives promised, but it isn’t last year’s phone either. The new kid in town features significant hardware improvements in the form of a quantum dot LCD IPS QHD display, a 64-bit hexa-core Snapdragon 808 processor, a 16MP rear camera full of innovative technology (three-axis OIS, Color Spectrum Sensor), better battery life, and much more! The smartphone is available in Metallic Gray, Ceramic White, and Genuine Leather finishes.

LG G4 H815 Sim Unlocking :
Unlock AT&T LG G4 H815 to use any where in the world with any supported service provider like

Optus Australia Brasil, Straight talk, FamilyMobile, Vodafone, Personal, Claro, O2, Digicel, Telcel, Orange, Telenor, Optus, Tele2, MTN Rogers, Fido, Chatr, Bell, Virgin, Sasktel, MTS, PC telecom, Tbaytel, Telus, Koodo

Only at


http://www.WorldGSMCodes.com/

Click here to buy Unlock code

LG G4 H815 Unlocking instructions:
1: Turn on phone with Not Accepted SIM card.
2: A menu will pop up to Insert the code.
3: Insert the provided code and press OK
4: Device is now unlocked.

How to Factory reset/ Hard Reset LG G4 H815:
How to Reset LG G4 H815 pattern lock:

WARNING !
Hard Reset will erase all of your data
All described operations you are doing at your own risk.

First Method:

  1. The cell phone must be turned off, so hold down the Power key for a short while.

    Name:  01.jpg
Views: 65
Size:  182.6 KB

  2. In the next step press and hold the Volume Down + Power button together for a couple of seconds.

    Name:  02.jpg
Views: 50
Size:  185.6 KB

  3. When the LG logo appers on the screen, release the Power key, keep pressing the Volume Down and then press once more the Power button.
  4. After that you should see the factory reset menu on your screen.

    Name:  03.jpg
Views: 58
Size:  123.2 KB

  5. You should confirm processby choosing appropriate options. Use Volume rockers to navigate and Power button to confirm.
  6. Wait to complete the operation.
  7. Success! The hard reset has just been completed.

Second Method:

  1. If the display is off hold down the Power button to turn it back on.

    Name:  01.jpg
Views: 65
Size:  182.6 KB

  2. In the next step go to Settings.
  3. Afterwards select General and then Backup & Reset.
  4. Then tap Factory Data Reset and Reset Phone.
  5. Choose Erase Everything if you are sure you want to clear all your data.
  6. Select OK to confirm the whole operation.
  7. Well done! Your phone is ready to use.

How to Update LG Escape 2 to Latest Firmware:

  1. On the computer, launch LGMobile Support Tool.

  2. Connect the phone to the computer using the USB cable.

  3. You’ll be prompted if an update is available. Click Start Updating.

  4. Read the warning and click Yes.

  5. The update process will now begin.

  6. The software will be downloaded to the computer.

  7. Wait while the software is installed on the phone.
    Note: Do not disconnect the USB cable from the phone during this process.

  8. The update is complete. Click Exit and Disconnect the phone.

How to Root LG G4 H815:

WARNING !
You will lose all your data and it is possible that you may brick your device
All described operations you are doing at your own risk.


Chainfire’s SuperSU root tool now supports the LG G4, allowing users to install root, change system partition and use apps that require root permission such as Titanuim backup, Xposed and its modules.

The root is currently available for the H815 model of G4, the international European model. This is because its manufacturer is allowing unlocking of bootloader for the aforementioned model only. Other variants will have to wait as LG has promised to add more devices with unlockable bootloaders.

Once the bootloader is unlocked, installing the root is as simple as flashing any other recovery flashable file. Following is a step-by-step guide to root the new LG phone.


Important points

  • The following root method is for the LG G4 H815 only. Do not apply this on any other device.

 

  • Ensure that you have created a backup of all the data of your phone, as the root method is likely to wipe out everything.

 

  • Rooting the device will void the manufacturer’s warranty.

 

  • The battery of the phone should have at least 80% charge to avoid any sudden shut down due to lack of power, which could damage the device.

 

  • IBTimes UK will not be held liable for any damage to the device during the process. Proceed at your own risk.

How to root LG G4 H815 with SuperSU:


Step-1:
Unlock the bootloader of LG G4. This step is must, as without unlocking the device you will not be able to install custom recovery


Step-2:
Install ADB and LG drivers (Windows ll Mac)


Step-3:
Install TWRP recovery


Step-4:
Download SuperSU root package

File name: UPDATE-SuperSU-v2.46.zip


Step-5:
Connect the phone to your PC with USB


Step-6:
Copy the root package to the phone’s storage and remember the location


Step-7:
Reboot the phone into recovery mode. Open a command window in the folder where you have saved the TWRP recovery. Hold the Shift key, right-click on an empty space inside the folder. A drop down menu will show up, select Open Command Window Here
A command (cmd) window will open. Execute the following command in the command window and press Enter

  • adb reboot recovery



Step-8:
In recovery, tap on Install then browse to the location where you have saved the SuperSU file, select it and do a swipe on the Swipe to Confirm Flash option

Step-9: On the next screen you should see successful written in blue text. Reboot the phone by selecting Reboot>> System. Wait until the phone boots up

You will now be able to enjoy root apps on your G4.

Cómo desbloquear AT & T LG G3 Vigor D727 Red Código de trabajar con FamilyMobile, Telstra Australia

LG G3 Vigor D727 Overview :
Running Android 4.4 KitKat with LG’s new UX (the same that’s found on the larger G3), the G3 s / G3 Beat sports a 5-inch IPS display with 720 x 1,280 pixels and a screen-to-body ratio of 74.1% – “the highest in the mid-tier smartphone segment.” The device is powered by a quad-core 1.2GHz Qualcomm Snapdragon 400 processor, and there’s only 1GB of RAM on board. Other features: 8MP rear camera with Laser Auto Focus, 1.3MP front-facing camera, 8GB of internal memory, microSD card support, and a 2,540 mAh removable battery.

LG G3 Vigor D727 Sim Unlocking :
Unlock AT&T LG G3 Vigor D727 to use any where in the world with any supported service provider like

Optus Australia Brasil, Straight talk, FamilyMobile, Vodafone, Personal, Claro, O2, Digicel, Telcel, Orange, Telenor, Optus, Tele2, MTN Rogers, Fido, Chatr, Bell, Virgin, Sasktel, MTS, PC telecom, Tbaytel, Telus, Koodo

Only at


http://www.WorldGSMCodes.com/

Click here to buy Unlock code

LG G3 Vigor D727 Unlocking instructions:
1: Turn on phone with Not Accepted SIM card.
2: A menu will pop up to Insert the code.
3: Insert the provided code and press OK
4: Device is now unlocked.

How to Factory reset/ Hard Reset LG G3 Vigor D727:
How to Reset LG G3 Vigor D727 pattern lock:

WARNING !
Hard Reset will erase all of your data
All described operations you are doing at your own risk.

By Factory Resetting your LG G3, you will lose all of your data that is saved on the internal storage of your phone. So, that’s why you should make a backup (if possible) before going any further. In that matter you can use compatible backup and restore apps from Google Play in order to save your contacts list, call logs, text messages, market apps, internet settings, images, videos or audio files.

Use Internal Settings

  1. Take your phone and tap on Menu.
  2. Then choose Settings.
  3. Go towards Backup and Reset and choose Factory Data Reset.
  4. Tap on Reset Phone and also choose Erase Everything.
  5. Agree with the alert and complete the hard reset process.

[h=Use Hardware buttons
]3[/h]Method 1

  1. Turn off your phone: press power button and select “power off” or press and hold power key for 5 or 6 seconds.
  2. Then press and hold power and volume down buttons at the same time.
  3. Release the buttons when the LG logo appears.
  4. Immediately press and hold power and volume down keys until the hard reset menu appears.
  5. If you can’t get it from the first time, just practice a little bit more, as you just have to be fast.

Method 2

  1. Turn off your LG G3.
  2. Press Volume Down and Power buttons at the same time.
  3. The LG logo will be displayed; at the point release only the power button.
  4. Immediately press power key again until the factory reset menu if displayed.

Method 3

  1. Turn off your handset.
  2. Press power and volume down keys at the same time.
  3. Wait for the LG logo to appear and release the buttons.
  4. Then, immediately press volume down and volume up buttons (simultaneously).
  5. Release the keys once the hard reset menu is being displayed on your LG G3.

Perfect; that was all for today. You now know how to easily and safely hard reset or factory reset your LG G3.

How to Update LG Escape 2 to Latest Firmware:

  1. On the computer, launch LGMobile Support Tool.

    attachment

  2. Connect the phone to the computer using the USB cable.

    attachment

  3. You’ll be prompted if an update is available. Click Start Updating.

    attachment

  4. Read the warning and click Yes.

    attachment

  5. The update process will now begin.

    attachment

  6. The software will be downloaded to the computer.

    attachment

  7. Wait while the software is installed on the phone.
    Note: Do not disconnect the USB cable from the phone during this process.

    attachment
  8. The update is complete. Click Exit and Disconnect the phone.

    attachment

How to Root LG G3 Vigor D727:

WARNING !
You will lose all your data and it is possible that you may brick your device
All described operations you are doing at your own risk.

Preparation:

  • Make sure your phone battery is charged to 70% or more
  • Enable USB Debugging, by open Settings > Developers Option > USB Debugging
    If Developers Option is hidden, go to Settings > General > About phone > Common > Software info (tap on it for 5-8 times)
  • Download and Install the LG USB Driver on the PC
  • Download and extract the LG One ClickRoot
  • If the file above does not work, please download LG One Click Root 1.3

One Click Script to Root LG Escape2 H443:

  • Connect your device with computer
  • Run One Click Script by double-clicking the LG Root Script.bat file
  • This will open a command window. Follow the instructions.

 

  • Wait until the root process is complete.
  • If the SuperSU App exist on your Application Menu on your smartphone it means you’ve succesfully rooted your device.


Caution!

If the phone not recognize, try to switch between MTP and PTP options.
If you got “MSVCR100.dll is missing” error, install Visual C++ Redistributable.
Download:
32 bit / 64 bit.

Cómo desbloquear AT & T LG Escape de 2 tarjetas SIM para trabajar en todo el mundo?

LG Escape 2 Overview :
The LG Escape 2 carries a 4.7 in-cell display which removes an extra-layer from the 720 x 1280 resolution screen. A 1.2 GHz, quad-core processor is employed by the device, which features 1GB of RAM and 8GB of native storage. Those requiring additional memory can use the 32GB capacity microSD slot. An 8MP camera is on back with a front-facing camera available for selfies. Lights are kept on thanks to the removable 2100mAh battery, and Android 5.0 is pre-installed. The LG Escape 2 comes with some popular LG features.

LG Escape 2 Sim Unlocking :
Unlock AT&T LG Escape 2 to use any where in the world with any supported service provider like

Optus Australia Brasil, Straight talk, FamilyMobile, Vodafone, Personal, Claro, O2, Digicel, Telcel, Orange, Telenor, Optus, Tele2, MTN Rogers, Fido, Chatr, Bell, Virgin, Sasktel, MTS, PC telecom, Tbaytel, Telus, Koodo

Only at


http://www.WorldGSMCodes.com/

Click here to buy Unlock code

LG Escape 2 Unlocking instructions:
1: Turn on phone with Not Accepted SIM card.
2: A menu will pop up to Insert the code.
3: Insert the provided code and press OK
4: Device is now unlocked.

How to Factory reset/ Hard Reset LG Escape 2:
How to Reset LG Escape 2 pattern lock:

WARNING !
Hard Reset will erase all of your data
All described operations you are doing at your own risk.

First Method:

  1. In order to switch off the cell phone, use the Power key.

    Name:  01.jpg
Views: 64
Size:  112.4 KB

  2. The hold down the Volume Down + Power button together for a couple of seconds.

    Name:  02.jpg
Views: 58
Size:  116.9 KB

  3. When the LG logo is displayed, let go of the Power key, keep pressing the Volume Down and then press once more the Power button.
  4. Afterwards you should see a factory reset menu on your screen.

    Name:  03.jpg
Views: 55
Size:  123.2 KB

  5. Confirm processby choosing appropriate options using Volume rockers to navigate and Power button to confirm.
  6. Now your phone should restart.
  7. Success! The hard reset has just been completed.

Second Method:

  1. If the display is off hold down the Power button to turn it back on.

    Name:  01.jpg
Views: 64
Size:  112.4 KB

  2. Afterwards go to Settings.
  3. Select General and then Backup & reset.
  4. In the next step tap Reset Phone.
  5. Choose Erase Everything if you are sure you want to clear all your data.
  6. Select OK to confirm the whole operation.
  7. Well done!

How to Update LG Escape 2 to Latest Firmware:

  1. On the computer, launch LGMobile Support Tool.

    Name:  01.jpg
Views: 265
Size:  53.9 KB

  2. Connect the phone to the computer using the USB cable.

    Name:  02.jpg
Views: 229
Size:  91.2 KB

  3. You’ll be prompted if an update is available. Click Start Updating.

    Name:  03.jpg
Views: 268
Size:  89.1 KB

  4. Read the warning and click Yes.

    Name:  04.jpg
Views: 205
Size:  82.5 KB

  5. The update process will now begin.

    Name:  05.jpg
Views: 281
Size:  41.6 KB

  6. The software will be downloaded to the computer.

    Name:  06.jpg
Views: 209
Size:  49.0 KB

  7. Wait while the software is installed on the phone.
    Note: Do not disconnect the USB cable from the phone during this process.

    Name:  07.jpg
Views: 267
Size:  50.5 KB
  8. The update is complete. Click Exit and Disconnect the phone.

    Name:  08.jpg
Views: 277
Size:  58.7 KB

How to Root LG Escape 2:

WARNING !
You will lose all your data and it is possible that you may brick your device
All described operations you are doing at your own risk.


How to Root LG Escape2 H443 with using a computer. In this tutorial we will use the Windows computer. This method should work on any LG official firmware (Kitkat 4.x.x / Lollipop 5.x.x). Smartphone Clinics is not responsible for any gain or loss incurred as a result of following this guide. Root your device at your own risk.

Preparation:

  • Make sure your phone battery is charged to 70% or more
  • Enable USB Debugging, by open Settings > Developers Option > USB Debugging
    If Developers Option is hidden, go to Settings > General > About phone > Common > Software info (tap on it for 5-8 times)
  • Download and Install the LG USB Driver on the PC
  • Download and extract the LG One ClickRoot
  • If the file above does not work, please download LG One Click Root 1.3

One Click Script to Root LG Escape2 H443:

  • Connect your device with computer
  • Run One Click Script by double-clicking the LG Root Script.bat file
  • This will open a command window. Follow the instructions.

    Name:  One-Click-Script-root-new-lg.jpg
Views: 74
Size:  55.7 KB

 

  • Wait until the root process is complete.
  • If the SuperSU App exist on your Application Menu on your smartphone it means you’ve succesfully rooted your device.



Caution!

If the phone not recognize, try to switch between MTP and PTP options.
If you got “MSVCR100.dll is missing” error, install Visual C++ Redistributable.
Download:
32 bit / 64 bit.