Cómo desbloquear AT & T LG G3 Vigor D727 Red Código de trabajar con FamilyMobile, Telstra Australia

LG G3 Vigor D727 Overview :
Running Android 4.4 KitKat with LG’s new UX (the same that’s found on the larger G3), the G3 s / G3 Beat sports a 5-inch IPS display with 720 x 1,280 pixels and a screen-to-body ratio of 74.1% – “the highest in the mid-tier smartphone segment.” The device is powered by a quad-core 1.2GHz Qualcomm Snapdragon 400 processor, and there’s only 1GB of RAM on board. Other features: 8MP rear camera with Laser Auto Focus, 1.3MP front-facing camera, 8GB of internal memory, microSD card support, and a 2,540 mAh removable battery.

LG G3 Vigor D727 Sim Unlocking :
Unlock AT&T LG G3 Vigor D727 to use any where in the world with any supported service provider like

Optus Australia Brasil, Straight talk, FamilyMobile, Vodafone, Personal, Claro, O2, Digicel, Telcel, Orange, Telenor, Optus, Tele2, MTN Rogers, Fido, Chatr, Bell, Virgin, Sasktel, MTS, PC telecom, Tbaytel, Telus, Koodo

Only at


http://www.WorldGSMCodes.com/

Click here to buy Unlock code

LG G3 Vigor D727 Unlocking instructions:
1: Turn on phone with Not Accepted SIM card.
2: A menu will pop up to Insert the code.
3: Insert the provided code and press OK
4: Device is now unlocked.

How to Factory reset/ Hard Reset LG G3 Vigor D727:
How to Reset LG G3 Vigor D727 pattern lock:

WARNING !
Hard Reset will erase all of your data
All described operations you are doing at your own risk.

By Factory Resetting your LG G3, you will lose all of your data that is saved on the internal storage of your phone. So, that’s why you should make a backup (if possible) before going any further. In that matter you can use compatible backup and restore apps from Google Play in order to save your contacts list, call logs, text messages, market apps, internet settings, images, videos or audio files.

Use Internal Settings

  1. Take your phone and tap on Menu.
  2. Then choose Settings.
  3. Go towards Backup and Reset and choose Factory Data Reset.
  4. Tap on Reset Phone and also choose Erase Everything.
  5. Agree with the alert and complete the hard reset process.

[h=Use Hardware buttons
]3[/h]Method 1

  1. Turn off your phone: press power button and select “power off” or press and hold power key for 5 or 6 seconds.
  2. Then press and hold power and volume down buttons at the same time.
  3. Release the buttons when the LG logo appears.
  4. Immediately press and hold power and volume down keys until the hard reset menu appears.
  5. If you can’t get it from the first time, just practice a little bit more, as you just have to be fast.

Method 2

  1. Turn off your LG G3.
  2. Press Volume Down and Power buttons at the same time.
  3. The LG logo will be displayed; at the point release only the power button.
  4. Immediately press power key again until the factory reset menu if displayed.

Method 3

  1. Turn off your handset.
  2. Press power and volume down keys at the same time.
  3. Wait for the LG logo to appear and release the buttons.
  4. Then, immediately press volume down and volume up buttons (simultaneously).
  5. Release the keys once the hard reset menu is being displayed on your LG G3.

Perfect; that was all for today. You now know how to easily and safely hard reset or factory reset your LG G3.

How to Update LG Escape 2 to Latest Firmware:

  1. On the computer, launch LGMobile Support Tool.

    attachment

  2. Connect the phone to the computer using the USB cable.

    attachment

  3. You’ll be prompted if an update is available. Click Start Updating.

    attachment

  4. Read the warning and click Yes.

    attachment

  5. The update process will now begin.

    attachment

  6. The software will be downloaded to the computer.

    attachment

  7. Wait while the software is installed on the phone.
    Note: Do not disconnect the USB cable from the phone during this process.

    attachment
  8. The update is complete. Click Exit and Disconnect the phone.

    attachment

How to Root LG G3 Vigor D727:

WARNING !
You will lose all your data and it is possible that you may brick your device
All described operations you are doing at your own risk.

Preparation:

  • Make sure your phone battery is charged to 70% or more
  • Enable USB Debugging, by open Settings > Developers Option > USB Debugging
    If Developers Option is hidden, go to Settings > General > About phone > Common > Software info (tap on it for 5-8 times)
  • Download and Install the LG USB Driver on the PC
  • Download and extract the LG One ClickRoot
  • If the file above does not work, please download LG One Click Root 1.3

One Click Script to Root LG Escape2 H443:

  • Connect your device with computer
  • Run One Click Script by double-clicking the LG Root Script.bat file
  • This will open a command window. Follow the instructions.

 

  • Wait until the root process is complete.
  • If the SuperSU App exist on your Application Menu on your smartphone it means you’ve succesfully rooted your device.


Caution!

If the phone not recognize, try to switch between MTP and PTP options.
If you got “MSVCR100.dll is missing” error, install Visual C++ Redistributable.
Download:
32 bit / 64 bit.

Leave a Reply