Desbloquear AT & T LG G Flex 2 Red Código de usar con Vivo Brasil, Tele2

LG G Flex 2 Overview :
The LG G Flex 2 is bent and curved to different degrees alongside its length, with the aim of feeling more ergonomic to the user. It is also the first Android smartphone to feature Qualcomm’s 64-bit octa-core Snapdragon 810 processor, DDR4 RAM, and a plastic OLED display with a 1080p resolution. Other innovative features are its self-healing back panel covering and a fast-charging 3000mAh battery.

LG G Flex 2 Sim Unlocking :
Unlock AT&T LG G Flex 2 to use any where in the world with any supported service provider like

Optus Australia Brasil, Straight talk, FamilyMobile, Vodafone, Personal, Claro, O2, Digicel, Telcel, Orange, Telenor, Optus, Tele2, MTN Rogers, Fido, Chatr, Bell, Virgin, Sasktel, MTS, PC telecom, Tbaytel, Telus, Koodo


Only at


http://www.WorldGSMCodes.com/

Click here to buy Unlock code

LG G Flex 2 Unlocking instructions:
1: Turn on phone with Not Accepted SIM card.
2: A menu will pop up to Insert the code.
3: Insert the provided code and press OK
4: Device is now unlocked.

How to Factory Reset/ Hard Reset LG G Flex 2:
How to Reset LG G Flex 2 pattern lock:

WARNING !
Hard Reset will erase all of your data
All described operations you are doing at your own risk.

First Method:

  1. At the very beginning switch off the device by holding the Power key.

    Name:  01.jpg
Views: 130
Size:  119.7 KB

  2. Then hold down the Volume Down + Power button together..

    Name:  02.jpg
Views: 110
Size:  123.2 KB

  3. When the LG logo is displayed, let go of the Power key, keep pressing the Volume Down and then press once more the Power button.
  4. Afterwards you should see a factory reset menu on your screen.

    Name:  03.jpg
Views: 88
Size:  124.2 KB

  5. Confirm processby choosing appropriate options using Volume rockers to navigate and Power button to confirm.
  6. Now your phone should restart.
  7. Success! The hard reset has just been completed.

Second Method:

  1. If the display is off hold down the Power button to turn it back on.

    Name:  01.jpg
Views: 130
Size:  119.7 KB

  2. Afterwards go to Settings.
  3. Select General and then Backup & reset.
  4. Tap Reset Phone.
  5. Choose Erase Everything if you are sure you want to clear all your data.
  6. Select OK to confirm the whole operation.
  7. Well done!

How to Update LG Escape 2 to Latest Firmware:

  1. On the computer, launch LGMobile Support Tool.

  2. Connect the phone to the computer using the USB cable.

  3. You’ll be prompted if an update is available. Click Start Updating.

  4. Read the warning and click Yes.

  5. The update process will now begin.

  6. The software will be downloaded to the computer.

  7. Wait while the software is installed on the phone.
    Note: Do not disconnect the USB cable from the phone during this process.

  8. The update is complete. Click Exit and Disconnect the phone.

How to Root LG G Flex 2:

WARNING !
You will lose all your data and it is possible that you may brick your device
All described operations you are doing at your own risk.

Step 1. Go to Settings -> About Phone -> Software Info then hit on the “Build Number” about 5 times until it says “You are now a developer”.

Step 2. Hit back button twice and now you should see “Developer options”, select it.

Step 3. Make sure “USB Debugging” is checked ON.

Step 4. Connect a micro-USB cable from your LG phone to your computer.

Step 5. Download LG_Root.zip and unzip the files. You should get a folder called “LG_Root” in your Downloads directory like shown below:

Download:

Download LG_Root.zip

Step 6. Make sure you have proper drivers installed. Go to Device Manager and find “ADB Interface”. If you don’t see it, download LG Drivers and install it. Then you should be able to see it.

Download Drivers:Download LG G Flex 2 Drivers for Windows (Works for most LG devices including LG G Flex 2, G2, G3, etc…etc…)

For Verizon LG devices, download the Verizon LG driver instead!!!

Step 7. Open a command prompt then type:

cd Downloads

cd LG_Root
adb devices

Then unplug and plug the micro-USB on your phone until you see “Allow USB Debugging” on the phone.
Select “Always alllow from this computer” then hit “OK”.
Type “adb devices” and you should see a serial number along with “device”. If you see this you are ready to rock!

Step 8. Next copy and paste the following:

adb.exe push busybox /data/local/tmp/ && adb.exe push lg_root.sh /data/local/tmp && adb.exe push UPDATE-SuperSU-v2.46.zip /data/local/tmp

For some reason, above code gets cut off, try copying and pasting this here:

adb.exe push busybox /data/local/tmp/ && adb.exe push lg_root.sh /data/local/tmp && adb.exe push UPDATE-SuperSU-v2.46.zip /data/local/tmp

Step 9. Power off your LG phone and unplug the micro-USB cable. Then WHILE HOLDING DOWN the Volume Up button, plug in the micro-USB cable. You should see “Downloading…”.

And after few seconds it should turn to “Firmware Update”.

Step 10. Next, double-click on “ports.bat” and read the COM number next to “DIAG1″. (Note, some users have reported you must do Right Click->Run As Administrator to get this step working although I didn’t have to.)

Step 11. Next, type:

Send_Command.exe \\.\COM24


But replace COM24 with the COM number you found in Step 10.

Then type:

sh /data/local/tmp/lg_root.sh dummy 1 /data/local/tmp/UPDATE-SuperSU-v2.46.zip /data/local/tmp/busybox

Step 12. If you have an LG phone with removable battery, simply pull battery and put it back in. For phones without removable battery like the LG G Flex 2, hold down Volume Up and Power buttons together for 30 seconds until your phone reboots.

Step 13. Once rebooted, you should find SuperSU app in your app drawer and a fully rooted phone!

Congratulations, you’ve successfully rooted your LG G Flex 2 (or other LG smartphone) on Lollipop!

 

Leave a Reply