Desbloquear Hutchison Australia HTC Desire 320 Código de red?

HTC Desire 320 Overview :
The HTC Desire 320 is endowed with a rather humble specs sheet. We are dealing with an unspecified breed of a quad-core chipset clocked at 1.3GHz, humbly paired with 1GB of RAM. We also have 8GB of storage, as well a microSD card slot. Up front, we have a 4.5-inch display with a resolution of 480×854 pixels. On the back, the Desire 320 offers a 5MP camera and a 2,100mah battery below the rear cover.Android 4.4 KitKat with HTC’s Sense UI powers the handset.

HTC Desire 320 Sim Unlocking :
Unlock Hutchison Australia HTC Desire 320 to use any where in the world with any supported service provider like

Optus Australia Brasil, Straight talk, FamilyMobile, Vodafone, Personal, Claro, O2, Digicel, Telcel, Orange, Telenor, Optus, Tele2, MTN Rogers, Fido, Chatr, Bell, Virgin, Sasktel, MTS, PC telecom, Tbaytel, Telus, Koodo

 

Only at


http://www.WorldGSMCodes.com/

Click here to buy Unlock code


HTC Desire 320 Unlocking instructions:

1: Turn on phone with Not Accepted SIM card.
2: A menu will pop up to Insert the code.
3: Insert the provided code and press OK
4: Device is now unlocked.

How to Factory Reset/Hard Reset HTC Desire 320:
How to Reset HTC Desire 320 pattern lock:

WARNING !
Hard Reset will erase all of your data
All described operations you are doing at your own risk.

If HTC Desire 320 has a persistent problem that cannot be solved, you can perform a factory reset (also called a hard reset or master reset).

Warning: Factory reset will remove apps you’ve downloaded and installed, your accounts, as well as system and app data and settings. Be sure to back up any data and files you want to keep before you do a factory reset. Factory reset may not permanently erase all data from your phone, including personal information.

Performing a Factory Reset from settings

  • Go to Settings.
  • Tap Backup & reset.
  • Tap Factory data reset.
  • Tap Reset phone, and then tap Erase everything.

Performing a Factory Reset using hardware buttons

If you can’t turn HTC Desire 320 on or access settings, you can still perform a factory reset by using the hardware buttons on HTC Desire 320.

  • Remove the battery, wait for a few seconds, then reinsert the battery.
  • Press and hold the VOLUME UP button, and then press and hold the POWER button.
  • Wait for the screen with the Android image to appear and to be in recovery mode, and then release the POWER and VOLUME UP buttons.
  • Press the POWER button.
  • Press the VOLUME DOWN button to select wipe data/factory reset, and then press the VOLUME UP button.
  • Press the VOLUME DOWN button to select Yes–delete all user data, and then press the VOLUME UP button. A message appears when the data has been wiped.
  • To restart the phone, select reboot system now, and then press the VOLUME UP button.

How to Update HTC Desire 320 to latest Firmware:

What’s in the update?
1. Improvement to notifications when using MVNO sims

Things to do before you update your software

  1. Make sure your phone has a good charge, or plug it into power
  2. Back up any important info before updating, just in case

How do I install the update?

  • This update is available using HTC’s Firmware Over-the-Air (FOTA) update platform, either via Wi-Fi or over 3G

Updating via FOTA
You can check for updates on your phone by going to Settings then About Phone, Software Updates, and finally Check Now.

  • Follow our PDF guide for further instructions
  • The update is approximately 6.69MB

What are the technical details?

Android version: 4.4.2
Kernel version: 3.4.67
Baseband version: MOLY.WR8.W1315.MD.WG.MP.V42.F5.P1
Build number: 1.01.862.2

How to Root HTC Desire 320:

WARNING !
You will lose all your data and it is possible that you may brick your device
All described operations you are doing at your own risk.

1. Download Super-Root.apk for HTC Desire 320 from this link : http://downloadsafe.org/file/0yF980

2. Connect your device to your PC using the USB cable.

3. Copy the Super-Root.apk over to the root of your SD card.

4. Once it’s been copied, disconnect your device from your PC.

5. Head to Menu>>Settings>>Security on your device and enable the Unknown sources option.

6. Open the File Manager app on your device and install the app you copied earlier to your device.

7. Once the app’s been installed, launch it from your App Drawer.

8. Select Install SuperSU from the first drop-down menu.

9. Select exploit, tap on it in the app.

10. The app should begin rooting your device, shouldn’t take too long to finish.

11. Reboot your device once it’s been rooted.

12. You’re all done! Excellent! You’ve successfully rooted your Android device using the Super-Root.apk app and you should now be able to see the SuperSU app in your App Drawer!

Leave a Reply